EMBROIDERING SETTINGS ——————————————————————————————————————————————————————————————————1284Touch to select the appliqué setting.• To cancel the setting, touch .X The steps for creating the appliqué pieceare added to the sewing order.Note● When is touched, the pattern ismoved to the center. After selecting theappliqué setting, move the pattern to thedesired position.● An appliqué piece cannot be created if thepattern is too large or too complicated or acombined pattern is separated. Even if theselected pattern fits within theembroidering area, the entire appliquépattern may exceed the embroidering areawhen the outline is added. If an errormessage appears, select a different patternor edit it.5Touch to continue to theembroidering screen.Memo● Three steps are added to the sewing order:appliqué cutting line, position of patternplacement on the garment, and appliquéstitching.1 Cutting line for appliqué2 Position of pattern placement on garment3 Appliqué stitching● We recommend using thread for thecutting line “APPLIQUE MATERIAL” thatis closest to the color of the fabric.6Fuse or stick a piece of stabilizer to the backof the felt or denim fabric to be used as theappliqué piece.7Hoop the appliqué fabric in the embroideryframe, attach the embroidery frame to themachine, and then start embroidering.8After the cutting line “APPLIQUEMATERIAL” is embroidered, stop themachine and remove the appliqué materialfrom the embroidery frame.9Carefully cut along the stitching. Aftercutting, carefully remove all of the cuttingline thread.1 Cutting line for appliqué123
