Using the Settings Key 2256—————————————————————————————————————————————————————————————————————————————————————Specifying the remaininglength of threadThis setting specifies whether the length of upperthread that remains threaded through the needleafter the thread is trimmed (length of thread passedthrough the eye of the needle) has a standard tail orlong tail.When the embroidery machine is purchased,“Standard Tail” is selected.The setting for the remaining length of thread canbe specified from page 2/5 of the settings screen.1Touch and to select the setting.The desired length is displayed.• If the machine misses stitches with astandard length of thread after it istrimmed, select “Long Tail”.• When using metallic thread, select “LongTail”.Changing the screen saversettings■ Specifying the length of time until the screensaver is displayedThe screen saver is displayed when no machineoperation is performed for the specified length oftime.A setting between “OFF” (0) and “60” minutescan be set in 1-minute increments.When the embroidery machine is purchased, “5min” is selected.The screen saver settings can be specified frompage 4/5 of the settings screen.1Touch and to select the desiredsetting.■ Changing the screen saver imageYou can select your own personal images for thescreen saver of your machine.Before changing the screen saver image, preparethe image on your computer or USB media.When the embroidery machine is purchased,the default setting is selected.The screen saver settings can be specified frompage 4/5 of the settings screen.Note● When using USB media, make sure that itcontains only your own personal imagesto be selected for the screen saver.● Folders are recognized. Open the folderthat holds your personal images.1Touch .Compatible image filesFormat JPEG format (.jpg)File size Max. 150 KB for each imageFile dimension480 × 800 pixels or less, (Ifthe width is more than 480pixels, the image importedwill be reduced to a width of480 pixels.)Number allowed 5 or less
