INSTALLATIONOIC INSTALLATIONI-E96-192-5A 3 - 17IIOIC423 Environmental Wiring Connections and CablingThe IIOIC423 operator interface console is internally wiredwhen it is shipped. Connect the AC power and any peripheraldevices. The power entry panel provides line filtering, transientsuppression and a 20-amp circuit breaker.1. Wire AC power to the proper terminals of the power entrypanel. Refer to Figure 3-12 for AC input terminal location.NOTE: Verify that the incoming voltage meets the rating on the labelof TB1. Connect only 120/240 VAC at 50/60 hertz into the terminalblock on the power entry panel.2. Connect only 120/240 VAC at 50/60 hertz into the termi-nal block on the power entry panel.3. Make certain the 120/240 VAC switch is in the properposition.Table 3-4 has a list of circled cables and a description of thecable connections. The cable connections are shown in Figure3-13. Circled numbers represent the cables.Figure 3-11. IIOIC423 Environmental Cabinet Anchoring Dimensions472.518.6012.70.50DIA MTG BOLTS4 REQUIREDSPLASH GUARDSAIRFILTER430.316.94711.228.00707.427.85MTG CTRS MTG CTRSTP35535BDIMENSIONSMILLIMETERSINCHES
