INSTALLATIONOPERATOR INTERFACE DEVICESI-E96-192-5A 3 - 296. Attach the touch screen controller card to the MKM cardwith the four nylon spacers and screws.CALIBRATING THE TOUCH SCREENOn-line calibration can be done from the console. For operatinginformation, refer to the operation and configuration instruction.TOUCH SCREEN JUMPER AND SWITCH SETTINGSJumpers J6 and J8 on the IIMKM02A keyboard module con-trol the touch screen option (Figure 3-23). Switch S1 and S2 onthe touch screen controller board must also be set.1. Set jumpers J6 and J8 at 2 to 3 on the IIMKM02A board.2. Jumpers J7 and J9 are for future use.NOTE: Setting jumpers at 2 to 3 disconnects the IIMKM02A lead. Acable then connects the touch screen controller directly to the CPUport 1. When not using the touch screen option, jumpers J6 and J8can be in any position.3. Set switches S1 and S2 on the touch screen controllerboard. See Figure 3-23 for settings.Figure 3-22. Touch Screen Controller Card ConnectionsCOMPONENTSIDEP15MKM BOARDP14TOUCH SCREENCARD 1TP80549A .
