Baldor 22H series Installation & Operating Manual

Contents

Baldor 22H series Installation & Operating Manual Manual pdf 62 page image

Section 1General InformationProgramming & Operation 4-3MN722Display Mode The control is in the DISPLAY MODE at all times except when parameter values arechanged (Programming mode). The Keypad Display shows the status of the control as inthe following example.Motor StatusControl OperationOutput ConditionValue and UnitsThe DISPLAY MODE is used to view operating status, Diagnostic INFO and the FaultLog. The description of how to do these tasks are described on the following pages.Adjusting Display Contrast When AC power is applied to the control, the keypad should display the status of thecontrol. If there is no visible display, use the following procedure to adjust the contrast ofthe display.(Contrast may be adjusted in display mode when motor is stopped or running)Action Description Display CommentsApply Power No visible displayPress DISP Key Places control in display modePress SHIFT SHIFT Allows display contrastadjustmentPress or Key Adjusts display intensityPress ENTER Saves level of contrast and exitsto display modeTypical display