www.baldormotion.comA-2 Accessories MN1919A.1.1 Fan trayThe fan tray (Baldor part FAN001-024) provides sufficient cooling for the 3A, 6A or 9AMicroFlex. It requires 23 - 27.5VDC at 325mA, which may be sourced from the same filteredcontrol circuit supply used for the MicroFlex. The MicroFlex is UL listed (file NMMS.E128059)when used in conjunction with the fan tray, mounted exactly as shown in Figure 45.Assembled MicroFlexand fan trayFan trayFAN001-02494 (3.7)84 (3.3)66 (2.6)142.5 (5.6)21.5(0.85)Fan traydimensions16(0.63)Bottom of MicroFlex4.5(0.18)17.3(0.68)Position of fan tray mountingholes relative to MicroFlexIt is important that the fan tray is mounted inclose proximity to the MicroFlex as shownabove. Failure to do so will result in decreasedcooling efficiency.Fan trayFigure 45 - Fan tray
