Banner AG4 Series User Manual
Also see for AG4 Series: Original instructions
                                                                                              | |
Contents
| 
Banner AG4 Series Safety Laser Scanner1.6 Security Protocol and Checkout ProceduresWARNING . . . CHECKOUTSThe commissioning, periodic and daily safety system checks must be performed by appropriate personnel at the appropriatetimes in order to ensure that the safety system is operating as intended. Failure to perform these checks may create apotentially dangerous situation which could lead to serious injury or death.1.6.1 Designated PersonA Designated Person is identified and designated in writing, by the employer, as being appropriately trained to performthe specified checkout procedures on the Scanner. A machine operator so designated may be a Designated Person.The Designated Person is empowered to: Perform manual resets and hold possession of the reset key Perform the daily Scanner checkout procedure1.6.2 Qualified PersonA Qualified Person, by possession of a recognized degree or certificate of professional training, or by extensiveknowledge, training and experience, has successfully demonstrated the ability to solve problems relating to theinstallation of the Scanner and its integration with the guarded machine. In addition to everything for which theDesignated Person is empowered, the Qualified Person is empowered to: Install the Scanner Perform all Scanner checkout procedures Control the password to access the Scanner’s configuration program Access and change the Scanner’s configuration settings Reset the system following a lockout condition Perform maintenance and repairs as described in Section 51.7 Responsibility for SafetyThe responsibility for the proper use of the Scanner and compliance with the regulations and directives that apply in thecountry of use lies with the machine's manufacturer and operator.At a minimum, the machine manufacturer is responsible for:WARNING . . . PROPER USEThe AG4 Scanner is for use only on machinery that can be stopped immediately after a stop signal is issued at any point in the machine's strokeor cycle. Under no circumstances may the Scanner be used on full-revolution clutched machinery or in unsuitable applications as those listed inSection 1.11.Allow only Qualified Persons to install and maintain the Scanner (see Section 1.6). Shift/Daily checkout procedure must be performedat every power-up, shift change, and machine setup. Refer to the instruction manuals and other reference materials (located in the Helpmenu) for all installation details, wiring diagrams, operating instructions, shift/daily/periodic checkout procedures, and warnings.If there is any doubt about whether or not your machinery is compatible with the Scanner, contact Banner's Application Engineers atthe factory. Failure to follow all instructions and warnings could lead to serious bodily injury or death.Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com |
Related manuals for Banner AG4 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine