Banner AG4 Series User Manual
Also see for AG4 Series: Original instructions
                                                                                              | |
Contents
| 
Banner AG4 Series Safety Laser Scanner Protective Field (PF) response time: Time until the Scanner switches off the OSSD 1 and OSSD 2 safetyoutputs or switching function (Default = 80 ms). Warning Field (WF) response time: Time until the Scanner switches off the Alarm output (Default = 80 ms).To determine the configured response times, establish communications with the Scanner, at which time the statusinformation should automatically upload from the Scanner. The Protective Field response time and the Warning Fieldresponse time will be listed in the ―Scanner status information‖ dialog box. A text file can be created or the informationcan be sent to a printer.If the ―Scanner status information‖ dialog box does not appear or otherwise needs to be accessed, click on (highlight)the System data Operating Mode tab, and then on the Menu Bar, click on System data > Transfer information fromScanner to PC to access the information.4.10 Periodic Checkout RequirementsTo ensure continued reliable operation, the System must be checked out periodically. See Section 6 for moreinformation.At every shift change, power-up and machine setup change, the Daily checkout should be performed; thischeckout may be performed by a Designated or Qualified Person (see Section 6.3 and the Daily Checkout Card for theprocedure).Semi-annually, the Scanner and its interface to the guarded machine should be thoroughly checked out; this checkoutmust be performed by a Qualified Person (see Section 6.4 and the Semi-Annual Checkout Card for the procedure). Acopy of these test results should be posted on or near the machine.Whenever changes are made to the System (either a new configuration of the Scanner or changes to the machine),the Commissioning Checkout should be performed; see Section 6.2.WARNING . . . VERIFY PROPER OPERATIONIt is the user’s responsibility to verify proper operation, on a regular basis, as instructed in Section 6. Failure to do so can result inundetected problems, which if not corrected, can result in serious bodily injury or death.Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com |
Related manuals for Banner AG4 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine