Banner AG4 Series Safety Laser Scanner4.2.2 Configuration Wizard: Changing Protective and Warning FieldsTo modify or create the shape of the Protective and Warning Fields, click on ―Protective/Warning Fields definition‖ tab onthe Operating Mode Tabs. Notice that the selection of the Operating Mode icons has changed. (See AG4Soft SoftwareManual for complete descriptions.)15 = Displayed Field Pairs selection16 = Load Protective/Warning Field from a file (loads field only, see icon 6)17 = Save Protective/Warning Field as a file (loads field only, see icon 7)18 = Print Protective/Warning Field19 = Select Protective/Warning Field20 = Enter Protective/Warning Field numerically21 = Define elliptical Protective/Warning Field22 = Define rectangular Protective/Warning Field23 = Define polygonal Protective/Warning Field24 = Change Protective/Warning Field segment25 = Change Protective/Warning Field segment on all fields26 = Reduce Protective/Warning Field limits27 = Blank out Protective/Warning Field segment28 = Define Protective Field segment as reference contour29 = Reset reference contour definition for Protective Field segment30 = Delete Protective/Warning Field (resets to Default Field)31 = Transfer changed Protective/Warning Fields from PC to ScannerSelect a field to be changed by clicking on the menu arrow of the ―Select Protective/Warning Field‖ (19). For thepurpose of the walk-through, click on ―Protective Field 1‖.15 16 17 18 1920 21 22 23 24 25 26 27 28 29 3031Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
