Banner AG4 Series User Manual
Also see for AG4 Series: Original instructions
                                                                                              | |
Contents
| 
Banner AG4 Series Safety Laser ScannerImportant . . . read this page before proceeding!In the United States, the functions that the Banner AG4 Series Safety Laser Scanner is intended to perform are regulated by theOccupational Safety and Health Administration (OSHA). Outside of the United States, these functions are regulated by otheragencies, organizations, and governments. Whether or not any particular Safety Laser Scanner installation meets all applicablerequirements depends upon factors that are beyond the control of Banner Engineering Corp. These factors include the way in wh ichthe Safety Laser Scanner is applied, installed, wired, operated, and maintained. It is the responsibility of the purchaser and userto apply this Safety Laser Scanner in full compliance with all relevant applicable regulations and standards.The Banner AG4 Series Safety Laser Scanner can guard against accidents only when it is properly installed and integrated into themachine, properly operated, and properly maintained. Banner Engineering Corp. has attempted to provide complete application,installation, operation, and maintenance instructions. In addition, please direct any questions regarding application or use of theScanner to the factory applications department at the telephone number or addresses shown on the back cover.In addition to OSHA regulations, several other organizations provide information about the use of safeguarding devices. Refer to theAmerican National Standards Institute (ANSI), the Robotics Industries Association (RIA), the Association for ManufacturingTechnology (AMT), and others. Banner Engineering Corp. makes no claim regarding a specific recommendation of any organization,the accuracy or effectiveness of any information provided, or the appropriateness of the provided information for a specificapplication.The user has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating tothe use of this safeguarding system in any particular application are satisfied. Extreme care is urged to ensure that all leg alrequirements are met and that all installation and maintenance instructions contained in this manual are followed.Safety Standards Applicable to Use of this ProductSee inside back cover for information pertaining to applicable U.S. and International standards, and where toacquire copies.Certificate of AdequacyThis instruction manual (P/N 144924) satisfies the requirements of Machinery Directive 2006/42/EC, Section 1.7.4 –Instructions.Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com |
Related manuals for Banner AG4 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine