7.6 System InfoVarious DXM system settings are shown in this menu. The Push, Ethernet, and Cell parameters are helpful for debuggingnetwork connections. This is a read only menu.Figure 34. System Info menuSystem Info ControllerPushISM RadioIO BoardDate:Firmware:Build:Model:Serial:Method:Interval: hh:mmURL:Page:Https: on/offSite ID:Serial:Model:Date:RF FW Pt:RF FW Ver:RF EE Pt:RF EE Ver:Serial:Model:Date:RF FW Pt:RF FW Ver:RF EE Pt:RF EE Ver:to change the valueto acceptENTERBACK to return to the previous menu↑ ↓Ethernet DHCP:IP:Subnet:Gate:Mac:DNS1:DNS2:Cell Signal:Phn#:Dev#:SIM:CellVer:CellMdl:CellFw:CellMask:Wifi IP:Mode:AP:Stat:Script Path:Baud:Code:LCD Board Serial:Model:Date:RF FW Pt:RF FW Ver:RF EE Pt:RF EE Ver:CellShows the cellular MEID number (Mobil Equipment Identifier), MDN (Mobil Device Number), version, signal, firewallsetting, and firewall mask. Some of these parameters are not visible until the cellular network is accessed.ControllerDisplays the date, build, model, and serial number.EthernetDisplays the IP address, MAC address, DHCP, Gateway address, and DNS settings.I/O BoardDisplays the serial number, model, date, firmware part numbers, and version numbers.Sure Cross® DXM150 and 1500-Bx Wireless Controllerswww.bannerengineering.com - Tel: + 1 888 373 6767 49
