121Settings• Bluetooth is switched on and atelephone is connected to the Cascade.! Press the rotary control/push button.The Bluetooth device list is displayed.The devices recognised by the Cascadeare displayed in this list. The currentstatus is indicated by means of a symbolnext to the name of the devices.• Connected device (marked with thesymbol)• Device with Standard status (markedwith the symbol)• Coupled devices (marked with thesymbol)• The symbol is shown on thedisplay if an error occurred inestablishing a connection. It is thenonly possible to disconnect the device.Always allow connectionWhen this function is activated thecorresponding external device canestablish a connection to the Cascadewithout you authorising it.! In the device list, select the device forwhich the “Always allow connection”setting is to be changed.! Press the rotary control/push buttonand hold until the following menuappears.! Select the Ačways aččow connection entry.! Press the rotary control/push buttonto switch the function on ( ) oroff ( ).70307031Notes:• The device which was stored in thedevice list last will be shown at theend of the list.• Devices stored in the list are retaineduntil the entry is deleted.• If no devices have yet been stored inthe device list, No BT devices will bedisplayed. You can then start a searchfor Bluetooth devices in “Searchingfor Bluetooth devices” auf Seite 127. 7032
