58Navigation mode! Confirm your selection by pressingthe rotary control/push button .• Traffic messagesYou can specify whether or not trafficannouncements should be read outautomatically by the unit and, if so,which ones.• Announce arrivač timeYou can specify whether the calculatedtime of arrival should be announcedautomatically once the route has beencalculated/recalculated.• Show speed čimitsIf the function is on, the system willinform you of the maximum permissi-ble speed limit for the route alongwhich you are travelling during routeguidance, insofar as this informationis available.• ETA settingYou can configure the calculation ofthe ETA. ETA stands for EstimatedTime of Arrival.• Unit of measureYou can convert the calculation of thedistances from metric (display in metresand kilometres) to imperial (display inyards and miles) system and vice versa.Traffic announcementsYou can specify whether or not trafficannouncements should be read out auto-matically by the Cascade and, if so,which ones.! In the Settings menu, select the Trafficmessages entry.! Confirm your selection by pressingthe rotary control/push button .! You may now select Announce mes-sages, On route ončy or Warnings ončy.• Announce messagesIf this function is active, all trafficannouncements are made automati-cally on receipt.• On route ončyIf you activate this function ( ),only the traffic announcements rele-vant to the route are made.• Warnings ončyActivate this function ( ) to haveonly warnings announced.! Turn the rotary control/push buttonto switch the required function on ( )or off ( ).20862087Note:This setting must be active ( ) in orderto be able to activate the two othersettings.
