130Settings! Turn the rotary control/push buttonand then press the rotary control/pushbutton to select the required language.The speaker selection list appears.! Turn the rotary control/push buttonand then press the rotary control/pushbutton to select the required speaker.The language and the selected speakerare installed.Displaying voice settingsThis function can be used to display thecurrently valid voice settings.! Select Show settings in the voice modesettings.The voice settings are displayed.• MMI čanguage: indicates the currentsetting for the display text language.• Navi speaker: indicates the current set-ting for the navigation announcementspeaker.• SDS: indicates the current setting forthe voice dialogue system speaker.• TTS: indicates the current languagesetting for reading out texts.Volume for voice outputYou can set the volume for announce-ments from your Cascade here.! Select Vočume of voice output in the voicemode settings.! Select Independentčy adjustabče or Rečativeto audio.• Independentčy adjustabčeYou can set the volume for announce-ments independently of the volume setfor the audio source.• Rečative to audioThe volume for announcements can beset in a specific range based on thevolume set for the active audio source.Note:To update the voice dialogue, you maybe prompted to insert the system CD. Ifyou are, insert it.70057006Note:Only one of the two settings may beactive ( ) at the same time.7007
