CAB a2+ Operating Instructions Manual
Also see for A2+: Operator's manualConfiguration instructionsUser configuration guide
                                        | |
Contents
| 
18 Operating Instructions Edition 5/06Loading mediaA2+/A4+/A6+/A8+6.1.4 Setting the label sensorFig. 6: Setting the label sensorThe label sensor (2) can be shifted perpendicular to the direction of paper flow for adaptation to the labelmedium. The sensor unit (1) of the label sensor is visible from the front through the print unit and ismarked with a indentation in the label sensor retainer. Position label sensor with tab (3) in such a way that the sensor (1) can detect the label gap or a reflexor perforation mark.- or, if the labels deviate from a rectangular shape, - Align label sensor using the tab (3) with the front edge of the label in the direction of paper flow.For use in Tear-Off mode only: Turn lever (Fig. 5, Item 9) clockwise to lock the printhead.The label roll is loaded for use in Tear-Off mode.1 23 |
Related manuals for CAB A2+
manualsdatabase
Your AI-powered manual search engine