CAB a2+ Operating Instructions Manual
Also see for A2+: Operator's manualConfiguration instructionsUser configuration guide
                                        | |
Contents
| 
A2+/A4+/A6+/A8+Cleaning and basic maintenanceEdition 5/06 Operating Instructions 318.8 Replacing the print roller and rewind assist rollerFig. 19: Removing the side plateRemoving the side plate1. Turn lever (1) counterclockwise to lift theprinthead.2. Lift the pinch roller (5) off the rewind assistroller.3. Remove labels and transfer ribbon fromthe printer.4. Loosen screws (4) on plate (6) with hexag-onal wrench by several turns and removeplate (6).5. Unscrew screws (3abc) of the side plate(2) with hexagonal wrench.6. Remove side plate (2).Fig. 20: Removing and installing rollersRemoving and installing rollers1. Pull print roller (7) and rewind assist roller(8) from the shafts (9, 10) on the housing.2. Clean shafts (9, 10) of the rollers (seeexpanded view at shaft (10)).3. Slide print roller (7) and rewind assist roller(8) onto their respective shafts and turnslightly until the hexagon of the shaftengages in the hexagon socket of the printroller.4. Set side plate (Item 2, Fig. 19) in place andscrew it down with the screws (Items 3abc,Fig. 19) by tightening the screws in order,i.e. a, b then c.5. Set plate (Item 6, Fig. 19) in place andtighten screws (Item 4, Fig. 19) with hex-agonal wrench.3a3b23c456789101 |
Related manuals for CAB A2+
manualsdatabase
Your AI-powered manual search engine