CAB a2+ Operating Instructions Manual
Also see for A2+: Operator's manualConfiguration instructionsUser configuration guide
                                        | |
Contents
| 
22 Operating Instructions Edition 5/06Loading mediaA2+/A4+/A6+/A8+6.2 Removing the wound rollFig. 10: Removing the wound roll1. Turn lever (7) counterclockwise to lift the printhead.2. Cut label strip and wind it fully around the rewinder (2).3. Hold rewinder (2) firmly and turn knob (3) clockwise.The rewinder spindle relaxes and the wound roll is released.4. Remove wound roll from rewinder (2).6.3 Loading fanfold labelsFig. 11: Feed path of paper with fanfold labels1. Loosen knurled screw (1) and slide guide (2) outward completely and swivel it downward past the rollretainer (3).2. If core adapters are mounted on the roll retainer (3), remove core adapters (see ”6.1.1” on page 16).3. Position label stack (4) behind the printer. Ensure that the labels on the strip are visible from above.2 13546751243 |
Related manuals for CAB A2+
manualsdatabase
Your AI-powered manual search engine