CAB a2+ Operating Instructions Manual
Also see for A2+: Operator's manualConfiguration instructionsUser configuration guide
                                        | |
Contents
| 
A2+/A4+/A6+/A8+Loading mediaEdition 5/06 Operating Instructions 196.1.5 Winding up the label strip in Rewind modeFig. 7: Guiding the label strip in Rewind modeIn Rewind mode, the labels are wound up internally after printing for later use.1. Remove the locking system for Rewind mode if necessary (see ”6.7” on page 25) and install rewindguide plate (see ”6.6” on page 24).2. Guide label strip around the rewind guide plate (4) to the internal rewinder (2).3. Hold rewinder (2) firmly and turn knob (3) clockwise until it stops.4. Push label strip under a bracket (1) of the rewinder and turn knob (3) counterclockwise until it stops.The rewinder is fully spread, thus gripping the label strip firmly.5. Turn rewinder (2) counterclockwise to tighten the label strip.6. Turn lever (5) clockwise to lock the printhead.The label roll is loaded for use in Rewind mode.2 1354 |
Related manuals for CAB A2+
manualsdatabase
Your AI-powered manual search engine