Cabletron Systems ELS10-26 Reference Manual

Contents

ELS10-26 MIB6-7lxadminAnyPass {lxadmin 2}Octet String Read-WriteThe authentication password (0-24 bytes) which must match thecommunity name in an SNMP Get, Getnext, or Set PDU, in orderfor the operation to be performed. A zero length passwordindicates that any community name is acceptable.lxadminGetPass {lxadmin 3}Octet String Read-WriteThe authentication password (0-24 bytes) which must match thecommunity name in an SNMP Get or Getnext PDU (except fordebug or password parameters). A zero length password indicatesthat any community name is acceptable. Alternatively, it isacceptable if the community name matches lxsdminAnyPass,defined above.1lxadminNMSIPAddr {lxadmin 4}IP Address Read-WriteThe address of the NMS to which Trap PDUs are to be sent. Avalue of zero indicates that Trap PDUs should be sent to the NMSlast heard from.lxadminStorageFailure {lxadmin 7}Integer Read-OnlyWhether the ELS10-26’s storage facility for its configurationparameters has failed during the last update operation (if theELS10-26 reboots after such a failure, it will use the factoryspecified defaults for all MIB parameters). Values include:• true (1)1. Certain SetRequest PDUs are used for read operations and usinglxadminGetPass for the community name is sufficient. Those special conditionsconsist of SetRequest PDUs for lxaddrOperation (for read-random, read-next,and read-block only), and for all MIB variables in the lxaddr group described asWrite-Ignore.