Cabletron Systems ELS10-26 Reference Manual

Contents

ELS10-26 MIB6-9lxadminStaticPreference {lxadmin 16}Integer Read-Write 2The value to assign to ipRouteMetric2, when adding astatically-defined entry to the IP Routing Table.lxadminRipPreference {lxadmin 17}Integer Read-WriteThe value to assign to ipRouteMetric2, when adding a RIP-learnedentry to the IP Routing Table.lxadminRipRouteDiscards {lxadmin 18}Counter Read-OnlyThe number of times a route learned via RIP was not added to theIP Routing Table due to insufficient Routing Table space.lxadminRebootConfig {lxadmin 19}Integer Read-WriteThe configuration file that will be used when the ELS10-26 reboots.This parameter is normally set by the ELS10-26 automatically;however, an NMS may explicitly set it to either no-change (1) orrevert-to-defaults (3). The possible values include:• no-change (1) – the ELS10-26 will not change its configurationparameters when it reboots.• tftp-config (2) – the ELS10-26 will use a file that was sent viaTFTP when it reboots .• revert-to-defaults (3) – the ELS10-26 will revert to its factoryspecified defaults when it reboots .Setting this parameter to a value of 2 will result in an errorcondition.2. If a value for ipRouteMetric2 is explicitly provided when an entry is created,then lxadminStaticPreference will be ignored.