Cabletron Systems ELS10-26 Reference Manual

Contents

6-12ELS10-26 MIBlxswdisWriteStatus {lxswdis 3}Integer Read-OnlyThe status of the erase/write operation. The possible values are:• in-progress (1) - An operation is currently in progress.• success (2) - The last operation completed successfully.• config-error (3) - Configuration EPROM encountered an error.• flash-error (4) - Flash EPROM encountered an error.• config-and-flash-errors (5) - Both Configuration EPROM andFlash EPROM encountered errors.lxswdisConfigIp {lxswdis 4}IP Address Read-WriteThe IP address of the NMS (i.e., any IP host) that is allowed to useTFTP to send/retrieve the configuration file of the ELS10-26. Avalue of 0.0.0.0 (which is the factory specified default) preventsany NMS from obtaining access, while a value of 255.255.255.255gives every NMS permission.lxswdisConfigRetryTime {lxswdis 5}Integer Read-WriteThe number of seconds that the ELS10-26 will wait for anacknowledgment before it retransmits an unacknowledged TFTPdata block. The factory specified default is 5 seconds.slxwdisConfigTotalTimeout {lxswdis 6}Integer Read-WriteThe number of seconds that the ELS10-26 will wait for anacknowledgment to a data block before it cancels a TFTP session.The factory specified default is 25 seconds.