Cabletron Systems ELS10-26 Reference Manual

Contents

ELS10-26 MIB6-27lxtrunkState {lxtrunkEntry 2}Integer Read-OnlyIndicates the trunking condition for this port. Values include:• off (1) – this link has not been enabled for trunking.• closed (2) – this link has not yet received any PDUs.• oneway (3) – incoming trunking PDUs do not indicate that theELS10-26’s PDUs are being successfully received by the far end.• joined (4) – this link is actively participating in the trunk group.• perturbed (5) – this link is actively participating in the trunkgroup; however, the transmission of data packets has beentemporarily stopped due to a change in membership of thetrunk group.• helddown (6) – an error has been detected and this link is beingheld out of service until the error clears.• broken (7) – this link has been configured for trunking but theport is physically non-operational.lxtrunkRemoteBridgeAddr {lxtrunkEntry 3}Octet String Read-OnlyThe MAC address portion of the bridge ID of the remote bridge.lxtrunkRemoteIp {lxtrunkEntry 4}IP Address Read-OnlyThe IP address of the remote bridge.lxtrunkLastError {lxtrunkEntry 5}Integer Read-OnlyThe reason for failure when the link is in the held-down state.Values include: