Cabletron Systems ELS10-26TX User Manual

Also see for SmartSTACK 10 ELS10-26: Reference guide Getting started

Contents

3-20Configuring Your ELS10-26• lxifTxStormCnt – specifies the maximum number of multicaststhat can be broadcast within the given time.• lxiTxStormTime – specifies the period of time that the maximumnumber of multicasts can be broadcasted.Refer to the ELS10-26 MIB Reference Guide for a complete listingand description of MIB variables.3.14 MODIFYING MIB VARIABLESSpecific instructions for controlling ELS10-26 operations,modifying parameters, and so on, depend on the NMS you areusing. This manual provides instructions for using LCMcommands. However, LCM commands do not exist for allconfiguration options. You may need to modify your configurationusing an NMS.This section provides several common MIB variables you maywant to change. Refer to the ELS10-26 MIB Reference Guide for acomplete listing and description of MIB variables.Each variable is first described in words, and is then identified inMIB form, for example, lxadminGetPass - {lxadmin 3}. The DisplayString line shows the range of values that can be used for the givenparameter. In each case, the DisplayString is a string of ASCIIcharacters.3.15 SYSTEM CONTACTThe system contact parameter identifies the contact person who isresponsible for operating the ELS10-26. Typically, this parameterincludes the person’s name, company or division name, andtelephone number.sysContact - {system 4}DisplayString (SIZE (0..255))