Configuration Commands80-10100000-09 4–25To display CLID numbers of the active channel which have been storedunder the calling line identification security system:1> CLID[CR]Stored B1 CLIDs:1 07931234562 09901234311etc.If you want to view a CLID number which has been stored in a specificlocation, add the number of that location after the CLID command:1> CLID 26[CR]Stored B1 CLID:26 0123456789To view the CLID numbers held within a range of store locations, followthe CLID command with the first and last numbers of the required range:1> CLID 68 70[CR]Stored B1 CLIDs:68 112345578969 0021124554170 0112245612If you want to view stored CLID numbers of the non active channel (inthis example, channel 2), first activate channel 2 followed by the CLIDcommand.2> CLID XX XX[CR]4.13.6 Connecting the USER Port to an Answered BackupCallWhen Talkwire is used (which is the normal use), the calling KBU 64 willissue commands to the called KBU 64 to connect it’s USER port to theISDN.The CONNECT parameter should normally be set to MANual, as theincoming commands provide Talkwire controlled connection.
