Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User's Reference Manual

Contents

Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User's Reference Manual Manual pdf 35 page image

SmartSwitch Router User Reference Manual 9Chapter 1: IntroductionDisplaying and Changing Configuration InformationThe SSR provides many commands for displaying and changing configurationinformation. For example, the CLI allows for the “disabling” of a command in the activeconfiguration. Use the negate command on a specific line of the active configuration to“disable” a feature or function which has been enabled. For example, Spanning TreeProtocol is disabled by default. If, after enabling the Spanning Tree Protocol on theSmartSwitch Router, you want to disable STP, you must specify the negate command withthe line number in the active configuration that contains the stp enable command.The table below shows some commands that are useful when configuring the SSR.“” Opaque strings may be specified using double quotes. This preventsinterpretation of otherwise special CLI characters.Table 1. CLI Line Editing CommandsCommand Resulting ActionTable 2. Commands to Display and Change Configuration InformationTask CommandEnable Mode:Show active configuration of the system. system show activeShow the non-activated configuration changes in thescratchpad.system show scratchpadShow the startup configuration for the next reboot. system show startupCopy between scratchpad, active configuration,startup configuration, TFTP server, RCP server, orURL.copy toConfigure Mode:Show active configuration of the system. show activeShow the non-activated configuration changes in thescratchpad.show scratchpadShow the startup configuration for the next reboot. show startupShow the running system configuration, followed bythe non-activated changes in the scratchpad.showCompare activated commands with the startupconfiguration file.diff | startup