Chapter 25: WAN Configuration Guide352 SmartSwitch Router User Reference ManualRouter R1 Configuration FileThe following configuration file applies to Router R1.Router R2 Configuration FileThe following configuration file applies to Router R2.----------------------------------------------------------------------Configuration for ROUTER R1----------------------------------------------------------------------port set hs.7.1 wan-encapsulation frame-relay speed 45000000port set hs.3.1 wan-encapsulation frame-relay speed 45000000port set hs.3.2 wan-encapsulation ppp speed 45000000port set et.1.* duplex fullframe-relay create vc port hs.7.1.106frame-relay create vc port hs.3.1.103frame-relay define service CIRforR1toR6 cir 45000000 bc 450000frame-relay apply service CIRforR1toR6 ports hs.7.1.106vlan create s1 id 200vlan create s2 id 300vlan add ports hs.3.1.103,hs.7.1.106 to s1vlan add ports hs.3.2 to s2interface create ip s1 address-netmask 100.100.100.1/16 vlan s1interface create ip s2 address-netmask 120.120.120.1/16 vlan s2rip add interface allrip set interface all version 2rip set interface all xmt-actual enablerip set auto-summary enablerip startsystem set name R1----------------------------------------------------------------------Configuration for ROUTER R2----------------------------------------------------------------------port set hs.7.1 wan-encapsulation ppp speed 45000000port set hs.7.2 wan-encapsulation ppp speed 45000000port set et.1.* duplex fullvlan create s2 id 300interface create ip PPPforR2toR3 address-netmask 130.130.130.2/16 peer-address130.130.130.3 port hs.7.2interface create ip SBitsLAN address-netmask 20.20.20.2/16 port et.1.1vlan add ports hs.7.1 to s2interface create ip s2 address-netmask 120.120.120.2/16 vlan s2interface create ip VideoClient address-netmask 200.200.200.1/16 port et.1.2qos set ip VideoFromNT high 100.100.100.100 200.200.200.200 any anyqos set ip VideoFrom95 high 200.200.200.200 100.100.100.100 any any
