SmartSwitch Router User Reference Manual 353Chapter 25: WAN Configuration GuideRouter R3 Configuration FileThe following configuration file applies to Router R3.Router R4 Configuration FileThe following configuration file applies to Router R4.rip add interface allrip set interface all version 2rip set auto-summary enablerip startsystem set name R2arp add 20.20.20.12 exit-port et.1.1 mac-addr 000202:020200----------------------------------------------------------------------Configuration for ROUTER R3----------------------------------------------------------------------port set se.2.1 wan-encapsulation frame-relay speed 1500000port set et.1.* duplex fullport set hs.4.1 wan-encapsulation frame-relay speed 45000000port set hs.4.2 wan-encapsulation ppp speed 45000000frame-relay create vc port se.2.1.304frame-relay create vc port hs.4.1.103vlan create s1 id 200interface create ip SBitsLAN address-netmask 30.30.30.3/16 port et.1.1vlan add ports hs.4.1.103,se.2.1.304 to s1interface create ip PPPforR2toR3 address-netmask 130.130.130.3/16 peer-address130.130.130.2 port hs.4.2interface create ip s1 address-netmask 100.100.100.3/16 vlan s1rip add interface allrip set interface all version 2rip set interface all xmt-actual enablerip set broadcast-state alwaysrip set auto-summary enablerip startsystem set name R3arp add 30.30.30.13 exit-port et.1.1 mac-addr 000303:030300----------------------------------------------------------------------Configuration for ROUTER R4----------------------------------------------------------------------port set se.6.1 wan-encapsulation frame-relay speed 1500000port set se.6.3 wan-encapsulation ppp speed 1500000
