Personalization FeaturesThe following choices are available for programming:Personalization NameThis feature allows you to type in a name that willappear on the DIC display whenever the correspondingremote keyless entry transmitter is used or one of thebuttons on the driver’s door armrest (1 or 2) is pressed.If a customized name is not programmed, the systemwill show DRIVER 1 or DRIVER 2 to correspond with thenumbers on the back of the remote keyless entrytransmitters.To program a name, use the following procedure:1. Enter the Personalization menu following theinstructions listed previously.2. Select the PERSONALIZATION NAME menu itemby pressing the TUNE/SEL knob once.You will see a cursor on the screen.3. Turn the TUNE/SEL knob until you reach the firstletter you want. The letter will be highlighted. Thereis a complete alphabet with both upper and lowercase letters and the numbers zero through nine.Also included are spaces and other non-lettercharacters such as the ampersand (&).4. Press the TUNE/SEL knob once to select the letter.The letter will then appear on the display.If you make a mistake, press the CLR button. Thiswill exit the menu. You can then go back into themenu and edit the name. You can also pressthe TUNE/SEL knob repeatedly to cycle through allthe characters until you reach the character youwish to change.5. Repeat Steps 3 and 4 until the name you want iscomplete. You can program up to 16 characters.The name you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Configure Display KeysThis feature allows you to customize the functions of thefour soft keys located to the left and right of the audiodisplay. See “Configurable Radio Display Keys” underRadio with CD on page 3-85 for programminginformation.3-71
