Holding the turn signal lever for more thanone second will cause the turn signals to flashuntil you release the lever. The lever will returnby itself when it is released.An arrow on theinstrument panelcluster will flash inthe direction of theturn or lane change.As you signal a turn or a lane change, if thearrows flash more quickly than normal, a signalbulb may be burned out and other drivers willnot see your turn signal.If a bulb is burned out, replace it to help avoid anaccident. If the arrows do not go on at all whenyou signal a turn, check for burned-out bulbs anda blown fuse. See Fuses and Circuit Breakerson page 503.Turn Signal On ChimeIf your turn signal is left on for more than3/4 of a mile (1.2 km), a chime will sound ateach flash of the turn signal and the messageTURN SIGNAL ON will also appear in the DIC.To turn the chime and message off, move theturn signal lever to the off position.Headlamp High/Low-Beam Changer53(Headlamp High/Low Beam Changer):To change the headlamps from low to high beam,push the lever toward the instrument panel.To return to low-beam headlamps, pull themultifunction lever toward you. Then release it.When the high beamsare on, this indicatorlight on the instrumentpanel cluster willalso be on.189
