Stationary or Very Slow-Moving Objects{ WARNING:Adaptive Cruise Control may not detect andreact to stationary or slow‐moving vehicles orother objects ahead of you. You could crash intoan object ahead of you. Do not use AdaptiveCruise Control when approaching stationary orslow‐moving vehicles or other objects.{ WARNING:Adaptive Cruise Control may not detect and reactto stationary or slow-moving vehicles or otherobjects ahead of you. Your vehicle may acceleratetoward objects, such as a stopped vehicle thatsuddenly appears after the lead vehicle changeslanes. Your complete attention is always requiredwhile driving and you should be ready to takeaction and apply the brakes.Low-Speed DeactivationIf your vehicle speed falls below 32 km/h (20 mph) whilefollowing a vehicle ahead, ACC will begin to disengage.The Driver Alert symbol will flash and the warning beepwill sound. The driver must take action since ACC willnot slow the vehicle to a stop.Passing a Vehicle/ACC OverrideTo increase speed to pass a vehicle, use theaccelerator pedal. While you are doing this, the systemwill not automatically apply the brakes. A message willappear on the DIC. See DIC Warnings and Messageson page 4‑66. Once you remove your foot from theaccelerator pedal, ACC will return to normal operationand be able to apply the brakes, if needed.{ WARNING:If you rest your foot on the accelerator pedal, thesystem will not automatically apply the brakes.You could crash into a vehicle ahead of you.Do not rest your foot on the accelerator pedalwhen using Adaptive Cruise Control.4-21InformationProvidedby:
