To reinstall the rear seat cushion, do the following:{ WARNING:A safety belt that is not properly routed throughthe seat cushion or is twisted will not provide theprotection needed in a crash. If the safety belt hasnot been routed through the seat cushion at all, it(Continued)WARNING: (Continued)will not be there to work for the next passenger.The person sitting in that position could be badlyinjured. After reinstalling the seat cushion, alwayscheck to be sure that the safety belts are properlyrouted and are not twisted.1. Buckle the center passenger position safety belt,then route the safety belts through the properslots in the seat cushion. Do not let the safety beltsget twisted.2. Slide the rear of the cushion up and under theseatback so the rear-locating guides hook into thewire loops on the back frame.3. With the seat cushion lowered, push rearward andthen press down on the seat cushion until thespring locks on both ends engage.4. Check to make sure the safety belts are properlyrouted and that no portion of any safety belt istrapped under the seat. Also make sure the seatcushion is secured.6-110InformationProvidedby:
