Black plate (45,1)Cadillac Escalade EXT Owner Manual - 2011Instruments and Controls 5-45This system provides a way toreplace up to three remote controltransmitters used to activatedevices such as garage dooropeners, security systems, andhome automation devices.Do not use this system with anygarage door opener that does nothave the stop and reverse feature.This includes any garage dooropener model manufactured beforeApril 1, 1982.Read the instructions completelybefore attempting to program thetransmitter. Because of the stepsinvolved, it may be helpful tohave another person assist withprogramming the transmitter.Be sure to keep the original remotecontrol transmitter for use in othervehicles, as well as for futureprogramming. Only the originalremote control transmitter is neededfor Fixed Code programming.The programmed buttons should beerased when the vehicle is sold orthe lease ends. See “ErasingUniversal Home Remote Buttons” inthis section.Park the vehicle outside of thegarage when programming a garagedoor. Be sure that people andobjects are clear of the garage dooror gate that is being programmed.Programming Universal HomeRemote — Rolling CodeFor questions or help programmingthe Universal Home RemoteSystem, call 1-866-572-2728 orgo to www.learcar2u.com.Most garage door openers soldafter 1996 are Rolling Code units.Programming a garage door openerinvolves time-sensitive actions, soread the entire procedure beforestarting. Otherwise, the device willtime out and the procedure will haveto be repeated.To program up to three devices:1. From inside the vehicle,press the two outside buttonsat the same time for one totwo seconds, and immediatelyrelease them.Ofrecido por www.electromanuales.com
