Black plate (66,1)Cadillac SRX Owner Manual - 20113-66 Seats and Restraints6. If the child restraint has a toptether, follow the child restraintmanufacturer's instructionsregarding the use of the toptether. See Lower Anchors andTethers for Children (LATCHSystem) on page 3‑56 for moreinformation.7. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,grasp the child restraint at thesafety belt path and attempt tomove it side to side and backand forth. When the childrestraint is properly installed,there should be no more than2.5 cm (1 in) of movement.To remove the child restraint,unbuckle the vehicle safety beltand let it return to the stowedposition. If the top tether isattached to a top tether anchor,disconnect it. If the head restraintwas removed, reinstall it beforethe seating position is used.See “Head Restraint Removaland Reinstallation” under LowerAnchors and Tethers for Children(LATCH System) on page 3‑56 foradditional information on installingthe head restraint properly.Securing Child Restraints(Front Passenger Seat)This vehicle has airbags. A rearseat is a safer place to securea forward-facing child restraint.See Where to Put the Restraint onpage 3‑53.In addition, the vehicle has apassenger sensing system which isdesigned to turn off the right frontpassenger frontal airbag undercertain conditions. See PassengerSensing System on page 3‑39 andPassenger Airbag Status Indicatoron page 5‑18 for more information,including important safetyinformation.A label on the sun visor says,“Never put a rear-facing child seatin the front.” This is because the riskto the rear-facing child is so great,if the airbag deploys.
