Black plate (41,1)Cadillac SRX Owner Manual - 2011Vehicle Care 10-41Front Turn Signal Lamp(Base and Up-Level)To replace the Front TurnSignal Lamp:1. Remove the turn signal lampbulb socket from the headlampassembly.2. Remove the turn signal lampbulb from the socket.3. Replace the bulb in the bulbsocket.4. Install the bulb socket in theheadlamp assembly.5. For driver side, reinstall theunderhood electrical centercover by latching three clips.6. For passenger side, reinstall theair filter/cleaner assembly baseby pushing to seat. Verify thebase is seated securely, theninstall the engine air filter/cleaner assembly.Fog LampsTo replace the fog lamp bulb:1. Locate the bulb assembly underthe front fascia.2. Disconnect the electricalconnector from the bulbassembly.3. Remove the bulb by turning itcounterclockwise and pulling itstraight out of the assembly.4. Install the new bulb by turning itclockwise into the assembly.5. Reconnect the electricalconnector to the bulb assembly.Turn Signal LampsTo replace one of these bulbs:1. Open the liftgate. See Liftgate(Manual) on page 2‑14 orLiftgate (Power) on page 2‑15.A. Push PinB. Taillamp Cover2. Pull on push pin (A) to releasethe taillamp cover (B).3. Remove the taillamp cover fromthe lamp assembly by pullingrearward from the top tounfasten from snap tabs.
