Black plate (10,1)Cadillac CTS/CTS-V Owner Manual (Include Mex) - 20122-10 Keys, Doors, and WindowsProgramming with a RecognizedTransmitterA new transmitter can beprogrammed to the vehicle whenthere is one recognized transmitter.For vehicles sold in Canada, tworecognized transmitters are requiredto program a new transmitter.1. Make sure the vehicle is off.2. Place the recognizedtransmitter(s) in the cupholder.Have the new transmitteravailable with you.3. Insert the vehicle key into thekey lock cylinder located on theoutside of the driver door.4. Turn the key to the unlockposition five times withinfive seconds.5. The Driver Information Center(DIC) displays READY TOLEARN ELECTRONIC KEY #2,3 or 4.6. Place the new transmitter intothe transmitter pocket with thebuttons facing the front of thevehicle. The transmitter pocketis inside the center consolestorage area located betweenthe driver and front passengerseats.7. A beep sounds once thetransmitter is programmed.The DIC displays READYTO LEARN ELECTRONICKEY #3 or 4, or MAXIMUM #ELECTRONIC KEYSLEARNED.8. Press the ignition control knob toexit programming mode.9. Remove the transmitter from thetransmitter pocket and press Kon the keyless accesstransmitter two times.10. To program additionaltransmitters, repeat Steps 6through 9.Programming without aRecognized TransmitterUnited States owners are permittedto program a new transmitter totheir vehicle when a recognizedtransmitter is not available.The Canadian immobilizerstandard requires that Canadianowners see their dealer forprogramming new transmitterswhen two recognized transmittersare not available.
