Black plate (6,1)Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-7707476) - 2015 - crc - 4/8/142-6 Keys, Doors, and WindowsKeyless Liftgate OpeningPress the touch pad on the liftgatehandle to open the liftgate if theRKE transmitter is within 1 m (3 ft).Programming Transmitters tothe VehicleOnly RKE transmitters programmedto the vehicle will work. If atransmitter is lost or stolen, areplacement can be purchased andprogrammed through your dealer.The vehicle can be reprogrammedso that lost or stolen transmitters nolonger work. Each vehicle can haveup to eight transmitters matchedto it.Programming with a RecognizedTransmitterA new transmitter can beprogrammed to the vehicle whenthere is one recognized transmitter.To program, the vehicle must be offand all of the transmitters, bothcurrently recognized and new, mustbe with you.1. Place the recognizedtransmitter(s) in the cupholder.2. Insert the vehicle key of thetransmitter into the key lockcylinder on the driver doorhandle and turn the key,counterclockwise, to the unlockposition five times within10 seconds.The Driver Information Center(DIC) displays READY FORREMOTE #2, 3, 4, ETC.3. Place the new transmitter intothe transmitter pocket. Thetransmitter pocket is inside thecenter console storage areabetween the driver and frontpassenger seats. The storagearea will need to be opened andthe storage tray lifted up toaccess the transmitter pocket.4. Press the ENGINE START/STOP button. When thetransmitter is learned the DICdisplay will show that it is readyto program the next transmitter.5. Remove the transmitter from thetransmitter pocket and press thetransmitter K or Q button.To program additionaltransmitters, repeat Steps 3–5.When all additional transmittersare programmed, press and holdthe ENGINE START/STOPbutton for 12 seconds to exitprogramming mode.InformationProvidedby:
