Black plate (51,1)Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-7707485) -2015 - CRC - 10/31/14Seats and Restraints 3-51. Use anchors 4 and 5 wheninstalling a child restraint usingLATCH in the left rear seatingposition.Installing child restraints usingLATCH in the center and left rearseating positions at the same time isprohibited.Make sure to attach the childrestraint at the proper anchorlocation.This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts.Instead use the vehicle's anchorsand child restraint attachments tosecure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to thechild restraint manufacturerinstructions and the instructionsin this manual.1.1. Find the lower anchors forthe desired seatingposition.1.2. For outboard rear seatingpositions, put the headrestraint in the uprightposition. See HeadRestraints on page 3-2.1.3. Put the child restraint onthe seat.1.4. Attach and tighten the lowerattachments on the childrestraint to the loweranchors.2. If the child restraint manufacturerrecommends that the top tetherbe attached, attach and tightenthe top tether to the top tetheranchor, if equipped. Refer to thechild restraint instructions andthe following steps:2.1. Find the top tether anchor.Open the cover to exposethe anchor.2.2. Route, attach, and tightenthe top tether according tothe child restraintinstructions and thefollowing instructions:
