Black plate (6,1)Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-7707485) -2015 - CRC - 10/31/142-6 Keys, Doors, and Windows1. Open the center console storagearea and the storage tray.2. Place the recognizedtransmitter(s) in the pocket. Thetransmitter pocket is inside thecenter console storage areabetween the driver and frontpassenger seats.3. Remove the key lock cylindercap. See Door Locks onpage 2-11. Insert the vehicle keyinto the key lock cylinder on thedriver door handle. Then turn thekey counterclockwise, to theunlock position, five times within10 seconds.The Driver Information Center(DIC) displays READY FORREMOTE #2, 3, 4, ETC.4. Replace the recognizedtransmitter with a newtransmitter. Place the newtransmitter in the transmitterpocket.5. Press the ENGINE START/STOP button. When thetransmitter is learned, the DICdisplay will show that it is readyto program the next transmitter.6. Remove the transmitter from thetransmitter pocket and press Kor Q on the transmitter.To program additionaltransmitters, repeat Steps 3–5.When all additional transmittersare programmed, press and holdthe ENGINE START/STOPbutton for approximately12 seconds to exitprogramming mode.7. Return the key back into thetransmitter.
