Driver’s Side Temperature KnobThe driver’s side knob is used to adjust the temperatureof the air coming through the system on the driver’sside. The temperature can be adjusted even if thesystem is turned off. This is possible since outside airwill always flow through the system as the vehicleis moving forward unless it is set to recirculation mode.See “Recirculation” later in this section.Turn the knob counterclockwise or clockwise to lower orincrease the cabin temperature. The display will showthe temperature setting decreasing or increasing and anarrow pointing to the driver will be displayed underand to the left of the temperature setting.Passenger’s Side Temperature KnobThe passenger’s side knob can be used to change thetemperature of the air coming through the systemon the passenger’s side of the vehicle. The temperaturecan be adjusted even if the system is turned off. Thisis possible since outside air will always flow through thesystem as the vehicle is moving forward unless it isset to recirculation mode. See “Recirculation” later in thissection.Turn the knob counterclockwise or clockwise to lower orincrease the cabin temperature. The display will showthe temperature setting decreasing or increasing and anarrow pointing to the passenger will be displayedunder and to the right of the temperature setting.The passenger’s temperature setting can be set tomatch the driver’s temperature setting by pressing andholding the AUTO button for four seconds. Both thedriver and passenger arrows will be displayed.Automatic OperationAUTO (Automatic): When automatic operation isactive the system will control the inside temperature,the air delivery, and the fan speed.Use the steps below to place the entire system inautomatic mode:1. Press the AUTO button.When AUTO is selected, the display will change toshow the current driver’s set temperature, deliverymode and fan speed. Press the AUTO button againwithin five seconds to display the passenger’s settemperature.If the driver’s and passenger’s temperature settingsare the same when AUTO is pressed, thetemperature setting and both arrows will bedisplayed for five seconds along with the automaticair delivery mode and fan speed. After the fivesecond update, the display will change to show thetemperature setting, both arrows and AUTO.3-24
