Care of Safety BeltsKeep belts clean and dry.{CAUTION:Do not bleach or dye safety belts. If you do,it may severely weaken them. In a crash,they might not be able to provide adequateprotection. Clean safety belts only with mildsoap and lukewarm water.WeatherstripsSilicone grease on weatherstrips will make them lastlonger, seal better, and not stick or squeak. Applysilicone grease with a clean cloth. During very cold,damp weather frequent application may be required.See Recommended Fluids and Lubricants on page 6-12.Washing Your VehicleThe paint finish on the vehicle provides beauty, depthof color, gloss retention, and durability.The best way to preserve the vehicle’s finish is tokeep it clean by washing it often with lukewarm orcold water.Do not wash the vehicle in the direct rays of the sun.Use a car washing soap. Do not use strong soapsor chemical detergents. Be sure to rinse the vehicle well,removing all soap residue completely. GM-approvedcleaning products can be obtained from your dealer.See Vehicle Care/Appearance Materials on page 5-103.Do not use cleaning agents that are petroleum based,or that contain acid or abrasives. All cleaning agentsshould be flushed promptly and not allowed to dry on thesurface, or they could stain. Dry the finish with a soft,clean chamois or an all-cotton towel to avoid surfacescratches and water spotting.High pressure car washes may cause water to enterthe vehicle.5-99
