Programmable AutomaticDoor LocksYour vehicle is equipped with an automatic lock/unlockfeature which enables you to program your vehicle’spower door locks. You can program this feature throughthe Driver Information Center (DIC), or by the followingmethod. See DIC Vehicle Customization on page 3-60for more information on DIC programming.Programmable Locking FeatureThe following two modes are available programmingoptions:Mode 1: All doors lock when the transmission is shiftedout of PARK (P).Mode 2: All doors lock when the vehicle speed isgreater than 8 mph (13 km/h).The following instructions tell you how to change theautomatic door lock mode. Choose one of the twoprogramming options listed above before entering theprogram mode. To enter the program mode, do thefollowing:1. Begin with the ignition off. Then pull the turnsignal/multifunction lever toward you and holdit there while you perform the next step.2. Turn the key to RUN then back to LOCK twice.Then, with the key in LOCK, release the turnsignal/multifunction lever. Once you do this, thedoors will lock and unlock, the horn will chirp twice,and a 30-second timer will begin. You are nowready to program the automatic door lock feature.3. Press the lock side of the power lock switch once.You will hear either one or two chimes. The numberof chimes tells you which lock mode is currentlyselected. Continue to press the door lock switchuntil the number of chimes that you hear matchesthe number of the mode that you want. If youtake longer than 30 seconds, the locks willautomatically lock and unlock and the horn willchirp twice to indicate that you have left theprogram mode. If this occurs, you can repeat theprocedure beginning with Step 1 to re-enterthe programming mode.You can exit the program mode any time by turning theignition to RUN. The doors will automatically lockand unlock and the horn will chirp twice to indicate thatyou are leaving the program mode. If the lock/unlockswitches are not pressed while in the programmingmode, the current automatic settings will not bemodified.2-10
