SERVICE RIDE CONTROLIf a problem occurs with the suspension system, thismessage will appear on the DIC. If this messageappears, stop and turn off the vehicle. Restart thevehicle and check for the message on the DIC display.If the message is still displayed or appears againwhen you begin driving, the suspension system needsservice. See your GM dealer. Pressing any of thefour DIC buttons, if equipped, will clear the messagefrom the DIC display. If your vehicle is not equipped withthe four DIC buttons, pressing the trip odometer resetstem will clear the message from the DIC display.SERVICE STABILITYIf you ever see the SERVICE STABILITY message, itmeans there may be a problem with your StabiliTrak®system. If you see this message, try to reset the system.Stop; turn off the engine; then start the engine again.If the SERVICE STABILITY message still comeson, it means there is a problem. You should see yourGM dealer for service. The vehicle is safe to drive,however, you do not have the benefit of StabiliTrak®,so reduce your speed and drive accordingly.For more information on the StabiliTrak ® system,see StabiliTrak ® System on page 4-8.SERVICE TIRE MONITORThis message will be displayed if any of the tire monitorsensors have malfunctioned, if the tire monitor sensorshave not been programmed or if the recommendedtire pressures are not programmed. See your GM dealer.Pressing any of the four DIC buttons, if equipped, willclear the message from the DIC display. If your vehicleis not equipped with the four DIC buttons, pressingthe trip odometer reset stem will clear the message fromthe DIC display.STABILITY SYS ACTIVEYou may see the STABILITY SYS ACTIVE message onthe DIC. It means that an advanced computer-controlledsystem has come on to help your vehicle continue togo in the direction in which you are steering.For more information on the StabiliTrak® system,see StabiliTrak ® System on page 4-8.3-57
