SEATS AND RESTRAINTS 57Memory SeatsDriver Buttons Shown, PassengerButtons SimilarIf equipped, the SET, 1, 2, and B(Exit) buttons on the driver door andfront passenger door are used tomanually store and recall memorysettings for the driver and passengerseats. The driver memory buttons alsostore outside mirror, power tilt andtelescoping steering column positions,and massage, if equipped.Storing Memory PositionsTo store positions to the 1 and 2buttons:1. The ignition must be in ON/RUN/START or ACC/ACCESSORY.2. Adjust the driver seat, power tiltand telescoping steering column,if equipped, massage type andintensity, if equipped, and theoutside mirrors on some vehicles.3. Press and release SET. A beepwill sound.4. Immediately press and hold 1until two beeps sound.5. Repeat Steps 1–4 for a seconddriver using 2.To store exit positions and easy exitfeatures to the B (Exit) button,repeat Steps 1–4 using B to storeyour positions for getting out of thevehicle.Manually Recalling MemoryPositionsPress and hold 1, 2, or B tomanually recall the previously storedmemory positions. Releasing 1, 2,or B before the stored positions arereached stops the recall.If the massage feature is off when thememory recall is performed, thepreviously stored type and intensitywill be recalled, but it will remain offuntil activated with the On/Off controlor through the center stack with theuplevel seat controls.Automatically Recalling MemoryPositions (Auto Memory Recall)(Driver Only)If programmed in the vehiclepersonalization Menu, the Auto(Automatic) Memory Recall featureautomatically recalls the currentdriver’s previously stored 1 or 2position when the ignition is changedfrom OFF to ON/RUN/START or ACC/ACCESSORY.See “Auto Memory Recall” under“Comfort and Convenience” in VehiclePersonalization 0 144.
