14 — Machinist calc™ Pro3. To permanently set the Fractional Resolution you haveselected above, press O (or any key) to set the displayedFractional Resolution and exit Preference Settings.KeySTROKe DISPLAyO 0.4. To recall your selected Fractional Resolution:r/ STD 0-1/64 INCH* 1/64" is the default setting. The display may differ from the exampledepending on what the resolution is currently set to.Temporarily Set fractional ResolutionYou can also convert a fractional value to a different resolutiontemporarily while solving a problem. In the example below, add1/64th to 44/64th of an Inch and then convert the answer toother Fractional Resolutions:KeySTROKe DISPLAyOO 0.44/64 0-44/64 INCH+1/64= 0-45/64 INCHg1(1/16) 0-11/16 INCHg2(1/2) 0-1/2 INCHg3(1/32) 0-23/32 INCHg4(1/4) 0-3/4 INCHg6(1/64) 0-45/64 INCHg8(1/8) 0-3/4 INCHOO* 0.* Changing the Fractional Resolution on a displayed value does notalter your Permanent Fractional Resolution Setting (set in PreferenceSettings).Note: This setting is temporary; it will revert back to your PermanentFractional Setting upon press of O or when you turn the calculator off.(cont’d)