24 — Machinist calc™ ProPaPErlESS TaPE OPEraTIONThe Paperless Tape allows you to display and review the lastthirty entries of a regular math or basic dimensional mathsequence.To access this mode after entering values, press g=. Then,press + or - to scroll forward or backward through theentries.While in the Paperless Tape mode, the display will showthe previously entered or calculated value, along with thesequential number of the entry (e.g., 01, 02, 03, etc.) and themath operator (+, –, x, ÷, %) in the upper left corner of thedisplay.Note: If = has been used in the middle of a sequence, SUB (forSubtotal) will display in the upper left. If = was the last operationperformed, the display will show TTL (Total) as the last entry.To exit this mode, press = to exit and maintain the last entryon the display. When exiting, the last entry (or TTL) will bedisplayed, allowing you to continue using the last tape valuefor another operation, if desired.Note: The Paperless Tape is cleared when you do one of the following:- O is pressed twice- upon a new calculation (new equation string is started)- when the calculator is shut off.Add a sequence of values and access Paperless Tape modeto review your entries. Then, add another value to your total.KeySTROKe DISPLAy1. Add a sequence of values:OO 0.4i+ 4. INCH