62 — Machinist calc™ ProAPPeNDIX C – cArE INSTrUcTIONSPlease follow the guidelines listed in this section for propercare and operation of your calculator. Not following theinstructions listed below may result in damage not covered byyour warranty. Refer to the WArrANTy section on page 69for more details.Do not expose calculator to temperatures outside the operatingtemperature range of 32ºF – 104ºF (0ºC – 40ºC).Do not expose calculator to high moisture such as submer-sion in water, heavy rain, etc.APPeNDIX D – AccUrAcy/ErrOrS, AUTOShUT-OFF, bATTErIES, rESETaccuracY/ErrOrSAccuracy/Display Capacity — Your calculator has a twelve-digitdisplay made up of eight digits (normal display) and four fractionaldigits. You may enter or calculate values up to 99,999,999.99.Each calculation is carried out internally to 12 digits.errors — When an incorrect entry is made, or the answer isbeyond the range of the calculator, an error message will dis-play. To clear an error condition you must press the keyonce. At this point, you must determine what caused the errorand re-key the problem.error CodesDISPLAy eRROR TyPeOfLO Overflow (too large)MATH error Divide by 0DIM error Dimension erroreNT error Invalid entry errorNONe Attempt to access clearedThread Size or Drill SizeValue; Invalid RCT Calculation