California Instruments 801RP Series User And Programming Manual
Also see for 801RP Series: Training manual
                                                                                     | |
Contents
| 
User and Programming Manual - Rev P California InstrumentsThe power source has two voltage ranges that are controlled by a relay. The command thatcontrols the range is:VOLTage:RANGe 136 | 272When the range is set to (136), the maximum rms voltage that can be programmed is 136volts rms, but it is only on this range that the maximum output current rating is available.The VRANGe command is coupled with the CURRent command. This means that themaximum current limit that can be programmed at a given time depends on the voltagerange setting in which the unit is presently operating.FrequencyThe output frequency is controlled with the FREQuency command. To set the outputfrequency to 50 Hz, use:FREQuency 50Current LimitTo set the rms current limit use:CURRent |
Related manuals for California Instruments 801RP Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine