Entering a nameWhenever you register a fax number or a telephone number, you can assign a name to that number. Toenter a name from the operation panel, use the numeric buttons to create alphanumeric characters.Each numeric button has a certain letter group (uppercase and lowercase) plus a digit assigned to it.Each press of the button steps to the next character in the group. To change between uppercase entrymode and lowercase entry mode, press [ ].Use the chart below to determine which number to press for each character:¶ First press the numeric button corresponding to the character you want.¶ Then press [ ] to switch to lowercase or uppercase entry mode.¶ Press the numeric button repeatedly until the character you want appears in the display.For example, to enter Canon 1:1 Press the appropriate numeric button repeatedly until the desired character appears.2 The next character is a lowercase, so press [ ] to change the uppercase letter entry mode to thelowercase letter entry mode. Then press the numeric button to display the desired character.3 The next character is in a different group, so simply press the new group’s numeric button--thecursor moves automatically. Press the numeric button repeatedly to display the desired character.´ ´Button Uppercase LowercaseC Press [2] three times.Ca Press [ ]. Then, press [2] once.Can Press [6] twice.PREPARING TO USE YOUR FAX30
