SettingsThe fax has seven sets of settings that control its various modes of operation.The settings and how to change them are described below.How to change a settingThere are two basic types of settings, selectable settings and numeric entry settings. The followingexample shows how to make both types of changes.Whenever you make a change to a setting, press [START/COPY] and confirm that DATA ENTRY OKdisplays on the LCD. Unless this message displays, the setting has not been changed.Example:Changing INCOMING RING, the number of rings before the faxanswers.1 Press [FUNCTION].Wait a second for TEL REGISTRATION toappear.2 Use [ ] or [ ] to select RX SETTINGS.3 Press [START/COPY].4 Use [ ] or [ ] to select INCOMING RING.5 Press [START/COPY].SELECT MENUTEL REGISTRATIONFUNCTION1 sec.RX SETTINGSECM RXSTART/COPYINCOMING RINGOFFSTART/COPY7777777777777777777777777777777777777781
