Cancelling SendingTo stop sending before the fax is finished, press [STOP]. Then you may need to open the operationpanel to remove the document, see Clearing document jams, p. 62.Rediallingj ManualTo start dialling again, just press [REDIAL/PAUSE]. (When you press [REDIAL/PAUSE], the previousnumber dialled with the numeric buttons is redialled.)j AutomaticThe fax automatically redials twice after the first attempt at sending fails (eg. the line was busy).The time between redials is two minutes.You can change the number of redials and the time between redials by changing the AUTO REDIALsetting in the TX SETTINGS (see p. 85).If the fax fails to get through after the second redial, the fax beeps.The LCD displays REDIALING while the fax is in the redialling process.j To cancel automatic rediallingYou can cancel automatic redialling anytime by pressing the [STOP] button.However, when memory is used during sending (including Delayed Sending and SequentialBroadcasting), you cannot cancel redialling while REDIALING is displayed on the LCD. In this case,wait until dialling begins, then press [STOP] to cancel redialling.REDIALINGSENDING FAXES60
